Configure Zone Transfer Settings for a Domain

The following describes how to add zone transfer access control to a domain.

This allows a secondary name server pull an AXFR transfer from UltraDNS Primary. 

To configure at account level see the following: Configure Zone Transfer Settings for Account.

1. Log into UltraDNS
2. Click Domains
3. Click <domain> that you are adding zone transfer access control to
4. Click the Properties tab
5. Click the ADD+  in the Zone Transfer Access Control section
6. Add any IP addresses you wish to allow under Restrict IPs
   1. Uncheck Inherit Account Settings
   2. Click Add+
   3. Select the Range Type (either IP Address Start/End, CIDR or Single IP Address)
   4. Enter the values for the IP address or range (under IP Range Start, IP Range End or CIDR or IP Address--whatever is on your screen here is determined by what you selected in previous substep)
   5. Enter any Comments or leave blank (optional field that has no impact on functionality)
   6. Click Save
7. Optional Step: Add any IP addresses you wish for us to send notifies to under Notify Addresses
   1. Uncheck Inherit Account Settings
   2. Click Add+
   3. Enter IP address under IP Address:
   4. Enter Description or leave blank (optional field that has no impact on functionality)
8. Optional Step: Under TSIG Key, enter your TSIG key if you wish to use TSIG authentication on zone transfers between our primary and your secondary (requires additional configuration your secondary name server)
   1. Uncheck Inherit Account Setttings
   2. Select the Algorithm you wish to use
   3. Click Autogenerate Key (or manually enter your own Name and Secret)
   4. Click Save Key